Jeep Wrangler EcoDiesel DPF Delete Kit with Bench-Flash Tuning (2020-2023)
The 2020, 2021, 2022, 2023 Jeep Wrangler 3.0 EcoDiesel Delete Kit with Bench-Flash Tuning combines an ECM bench-flash calibration with a hand-crafted race pipe for the JL Wrangler 3.0L V6 diesel. The package removes the restrictive DPF/SCR exhaust section, disables supported emissions strategies, and provides Stock, Stage 1, or Stage 2 calibration.
What's included in delete kit
The Jeep EcoDiesel Delete Kit uses a send-in ECM tuning service instead of a handheld tuner or wireless flash device.
-
Bench-Flash ECM Tuning - The original ECM is removed from the vehicle and shipped to the tuning facility. The module is flashed directly on the bench with a calibration matched to the 2020-2023 3.0L EcoDiesel.
-
Hand-Crafted Race Pipe - The race pipe replaces the factory DPF and SCR exhaust section to create a less restrictive exhaust path. The pipe is designed around the Jeep Wrangler JL EcoDiesel layout.
-
Exhaust Hardware - Required clamps and connection hardware are supplied with the race pipe for installation in place of the factory particulate and catalyst assembly.
-
ECM Return Shipping - The bench-flash service includes the normal shipping workflow for sending the ECM to the tuning facility and returning the flashed module.
-
EGR Port Requirement - The factory EGR system remains physically installed. A separate EGR block-off plate for the secondary exhaust-side port must be fabricated or sourced by the installer.
The product is not a conventional physical EcoDiesel EGR Delete kit. EGR-related operation is handled through calibration while required sensors and factory hardware remain connected.
Shipping Process: We’ll send you a prepaid shipping label so you can ship your ECM to us. Once the module arrives and passes inspection, we’ll reprogram it on the bench and send it back to you via express delivery. Please keep in mind that bench flashing can sometimes call for extra technical steps, troubleshooting, and testing to make sure the module works exactly as it should. We cover all standard shipping costs; the only exception is brokerage fees, which are rare but would be the customer’s responsibility. The whole process usually takes 4–6 business days, plus another 2–3 days for return transit, though exact timing can shift depending on our current workload and the technical requirements of your job. If keeping your vehicle off the road for as little time as possible matters most, ask us about our tuner option as a faster alternative.
Please Note: Prepaid shipping labels are valid for 60 days from issuance. If you didn't manage to ship your ECM within this window and your label expires, please contact us to request a new one before sending your package.
Vehicle compatibility
The bench-flash package is configured for the third-generation 3.0L EcoDiesel used in supported Jeep Wrangler applications.
-
Years: 2020, 2021, 2022, 2023
-
Make: Jeep
-
Model: Wrangler
-
Application: Wrangler / Rubicon EcoDiesel
-
Engine: 3.0L V6 EcoDiesel
-
Transmission: 8-speed automatic
-
Factory emissions: DPF, DEF, SCR, EGR
The original ECM is required for the bench-flash service. A previously tuned ECM must be returned to its stock calibration before another bench-flash tune can be installed.
Performance & tuning
The EcoDiesel Tuner service uses single-stage ECM calibration rather than SOTF or selectable power changes from inside the vehicle.
-
No forced DPF regeneration
-
Reduced exhaust backpressure
-
Improved throttle response
-
Stronger off-road performance
-
No handheld tuner required
Gains by power level
|
Power level |
+HP |
Best for |
|---|---|---|
|
Stock |
0 HP |
Stock-like output |
|
Stage 1 |
+30 HP |
Daily / moderate off-road use |
|
Stage 2 |
+50 HP |
Higher-output off-road use |
The confirmed bench-flash data does not provide fixed torque figures, so lb-ft gains should not be presented as guaranteed values.
The selected calibration is written directly to the ECM. Changing from Stock to Stage 1 or Stage 2 requires another flash rather than an on-the-fly power-level change.
|
Parameter |
Expected change |
|---|---|
|
DPF regeneration |
Disabled after correct calibration |
|
Exhaust backpressure |
Reduced after DPF/SCR section removal |
|
DEF strategy |
Calibration-dependent; factory tank remains installed |
|
EGR strategy |
Modified by calibration; factory hardware remains connected |
|
Throttle response |
Improved with performance calibration |
|
MPG |
Results depend on tune, tires, gearing, terrain, and driving style |
|
EGTs |
Reduced restriction may lower exhaust temperature under sustained load |
|
Towing |
Moderate calibration is preferable when operating under higher load |
The 3.0 EcoDiesel Delete Kit does not use a smartphone app, handheld programmer, or remote flash device. The ECM must physically be sent in for programming.
How the delete kit works on your EcoDiesel 3.0
The Jeep Wrangler EcoDiesel Delete Kit combines a mechanically less restrictive exhaust path with a bench-flashed ECM calibration.
-
Bench flash recalibrates supported emissions control strategies.
-
Race pipe replaces the restrictive DPF/SCR exhaust section.
-
Calibration stops normal DPF regeneration after hardware removal.
-
Secondary EGR exhaust port is physically blocked.
-
Remaining sensors stay connected for correct module operation.
The factory EGR valve, throttle valve, MAF, MAP, remaining EGT sensors, DEF tank, and associated DEF sensors should remain installed unless separate verified instructions specifically state otherwise.
Installation information
Installation instructions are supplied with the package, but the job includes both ECM removal and exhaust work. A mechanically experienced owner can perform the hardware installation, while the actual ECM flash is completed by the bench-flash service.
Before removing the ECM, resolve active warning lights, DPF/DEF countdowns, and stored emissions faults. Perform the required DPF regeneration before the flash so soot accumulation data is correctly reset.
Technical specifications
|
Specification |
Detail |
|---|---|
|
Fitment years |
2020-2023 |
|
Tuning |
Bench-flash service |
|
ECM |
Original module must be sent in |
|
Remote tuning |
Not available |
|
Tune type |
Single-stage calibration |
|
Power levels |
Stock / Stage 1 +30 / Stage 2 +50 HP |
|
Exhaust component |
Hand-crafted race pipe |
|
Exhaust sections removed |
DPF / SCR |
|
EGR hardware |
Retained |
|
EGR block-off plate |
Installer-sourced / fabricated |
|
DEF tank |
Retained |
|
MAF / MAP |
Retained |
|
EGT sensors |
Remaining sensors retained |
|
Previously tuned ECM |
Must be returned to stock first |
|
Typical bench turnaround |
4-6 business days |
|
Typical return transit |
2-3 days |
No More Emissions Codes
Correct bench-flash calibration prevents supported PCM warnings caused by the removed DPF/SCR exhaust hardware and modified EGR strategy. The Jeep must be fault-free before the ECM is removed because existing countdowns or module-level faults may not be cleared by the bench flash.
DPF & Regeneration Codes
|
DTC Code |
Description |
|---|---|
|
P1451 |
Diesel Particulate Filter System Performance |
|
P2002 |
Diesel Particulate Filter Efficiency Below Threshold |
|
P242F |
Diesel Particulate Filter Restriction / Ash Accumulation |
|
P2463 |
Diesel Particulate Filter Restriction / Soot Accumulation |
DEF & SCR Codes
|
DTC Code |
Description |
|---|---|
|
P20EE |
SCR NOx Catalyst Efficiency Below Threshold |
|
P208B |
Reductant Pump Control Performance |
|
P204F |
Reductant System Performance |
|
P207F |
Reductant Quality Performance |
EGR Codes
|
DTC Code |
Description |
|---|---|
|
P0401 |
System Performance / Insufficient Flow |
|
P24A5 |
Cooler Bypass Control Stuck |
Catalyst Codes
|
DTC Code |
Description |
|---|---|
|
P0420 |
Catalyst System Efficiency Below Threshold |
These code families are documented on the 3.0L EcoDiesel platform, but an active fault or DEF countdown should be repaired and cleared before the ECM is shipped. The bench-flash service should not be treated as a method for hiding an existing mechanical or electrical problem.
The bundle uses bench-flash tuning and a race pipe rather than a handheld tuner; the DEF tank and EGR hardware remain installed, and the secondary EGR block-off plate must be supplied by the installer. Send the VIN before ordering to confirm the exact Wrangler configuration.

