Bench-Flash Delete Tuning for 2014-2023 Dodge RAM 1500 EcoDiesel 3.0L
Unlock the full potential of your 2014-2023 Dodge RAM 1500 EcoDiesel 3.0L with Bench-Flash Delete Tuning. This tuning solution removes factory emissions restrictions, optimizing performance, fuel efficiency, and overall drivability.
Key Features
- DPF/DEF/EGR Delete – Disables emissions-related systems for unrestricted performance.
- Custom Bench-Flash Tuning – Optimized for your specific vehicle configuration.
- Improved Fuel Efficiency – Reduces backpressure and optimizes fuel delivery for better MPG.
- Increased Power & Torque – Unlocks additional horsepower and torque for smoother acceleration and better towing capability.
- Smoother Transmission Shifting – Adjusts transmission parameters for better shift points and improved drivability.
- No CEL Issues – Ensures a trouble-free experience with no check engine lights after tuning.
How It Works
- Send Your ECM – The tuning process requires a Bench-Flash, meaning the ECM must be sent in for modification.
- Custom Calibration – The ECM is programmed with a delete tune that optimizes engine performance.
- Receive & Reinstall – Once the ECM is returned, simply reinstall it, and your truck is ready to go.
Vehicle Compatibility
- Designed for Dodge RAM 1500 EcoDiesel 3.0L models:
- 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Benefits
- More Power & Performance – Eliminates factory emissions restrictions for better engine response.
- Lower Maintenance Costs – No more clogged DPF, EGR issues, or DEF system failures.
- Better Fuel Economy – Reducing restrictions allows the engine to run more efficiently.
- Reliable & Safe Tuning – Bench-Flash tuning ensures a properly calibrated ECM for long-term durability.
Legal Note
- For Off-Road Use Only – This tuning is intended for off-road applications and may not comply with emissions regulations. Check local laws before installation.
EcoDiesel Delete Process – 2020+ Jeep & Ram
Pre-Tune Checklist:
Before tuning the PCM, perform a DPF regeneration. This step is critical, as it resets the DPF accumulation values—something that cannot be done after the PCM has been modified.
Delete Procedure:
At this stage, remove the DPF and SCR components from the exhaust system. Leave the EGR system, throttle valve, MAF, MAP, and all EGT sensors in place. Do not modify or disconnect the DEF tank or its associated sensors.
The customer is responsible for fabricating a block-off plate for the secondary EGR port (which typically routes back into the exhaust system).
ECM Removal Instructions:
-
Clear all dashboard alerts or service warnings.
-
If applicable, address any DEF/DPF countdown issues before removing the ECM.
-
Switch off the ignition and disconnect the negative battery terminal.
-
Carefully remove the ECM and prepare it for shipment.
Critical Installation Reminder: Before installing this tune, ensure your PCM is restored to its factory settings if it has been tuned previously. For a trouble-free setup, disconnect all EGR, DPF, SCR, and AdBlue sensors, and remove the AdBlue/SCR PCM to prevent error codes from appearing.
Shipping Process: We’ll provide a prepaid shipping label for you to send your ECM to us. Once we receive and inspect the module, we’ll proceed with flashing it and then ship it back to you via express delivery. While we cover all standard shipping costs, please note that any additional brokerage fees (which are uncommon) will be your responsibility. The entire process typically takes 4–6 business days, plus an additional 2–3 days for return transit.
Tuning Process: Please note that during periods of high workload, some delays may occur. Additionally, we may perform extra checks to ensure the bench flash tuning is completed with the highest accuracy.
Upgrade your 2014-2023 Dodge RAM 1500 EcoDiesel 3.0L with Bench-Flash Delete Tuning, delivering maximum power, efficiency, and reliability.